|
Booth Dimension |
|
- Internal Size(L×B×H) |
15000×5000×5000mm & 49'2''X16'4''X16'4'' |
|
- External Size(L×B×H) |
15144×6896×5600mm & 49'7''X22'6''X18'4'' |
|
Foundation and Floor |
|
- Grid |
96M ( 2 rows air exhust plenum chamber) |
|
- Metal Basement |
Need to build the base construction , 2 rows of pits in the ground for exhaust air,
dimension of each pit is 12650×760mm(L×W), with galvanized grids made by
twisted steel and flat bar above |
|
Wall and Door |
|
- Steel Wall |
Profiled bar beams in the roof to strengthen the room body.
Double construction with insulations EPS , thickness 70mm, width:1150mm,
tongue and groove interlock structure |
|
- Roof Panel |
Single profiling galvanization plate |
- 4-Folded Entrance Door
With Safety Glass Window |
1 Unit, 4000×4500mm (WxH) galvanized steel cover frame, with polystyrene(EPS) inside |
- Operator’s Door With
Safety Glass Window |
2Units, 800×2000 mm(W×H) |
|
Lighting System |
|
- Ceiling Lights |
18Units, each 4×36 W, with electronic ballasts |
|
- Side Lights |
12U22Units, each 4×36W, with electronic ballasts |
|
- Brightness |
>1000LUX |
|
Filter System |
|
- Filter |
Pre-filter, ceiling filter, exhaust fiberglass filter, activated carbon filter |
|
- Filtering area |
44M2 |
|
Ventilation System |
- Intake air system
(Fresh Air) |
4×7.5KW double-intake centrifugal fans for intake air,
model YDW4.5M, total air capacity 42000m3/h |
- Exhaust
air system(Exhaust Air) |
2×11KW double-intake centrifugal fans for exhaust air, with motor outside, belt-drive, model TAE-710H, total air capacity 36000m3/h |
|
- Damper actuates |
Equip pneumatic damper actuates from spraying to baking cycle,
manual dampers for exhaust air |
|
Heating System |
|
- Heating Exchange |
Stainless Steel |
- Heating
Exchange Capacity |
260000Kcal/h |
- Max. Drying
Temperature |
80 °C |
|
- Heating time |
8-10 min (from 20 to 60) by Drying Phase |
|
- Heating Type (optional) |
RIELLO RG5S (260000 kcal/h)Diesel )2set |
|
Control Box |
|
- Control system |
Spraying, heat spraying, baking, time setting, lighting switch, failure indicator,
thermostat, power supply switch, emergency stop, ampere meter, voltmeter,
hour meter, temperature limit controller, pressure gauge, exhaust reduction
voltage motor start |
|
- Total power |
63KW |
